Users Manual Part 2

CP880+CR650
42
Figure 5-27
To delete an item from the Wi-Fi access list, perform the following steps:
1. Choose Wi-Fi > Access Management.
2. Choose the item to be deleted, and click Delete. As shown in Figure 5-28.
Figure 5-28
5.3.4 WPS Settings
Wi-Fi Protected Setup (WPS) enables you to simply add a wireless client to the network
without needing to specifically configure the wireless settings, such as the SSID, Firewall
mode and passphrase. You can use either the WPS button or PIN to add the wireless client.
To configure Wi-Fi WPS settings, perform the following steps:
1. Choose Wi-Fi > WPS Settings.
2. Set WPS to Enable.
3. Select WPS mode to PBC or router PIN as you want.
4. Click Submit. As shown in Figure 5-29.