Users Manual Part 2

CP880+CR650
38
802.11b or 802.11g mode.
802.11b The Wi-Fi client can connect to the CPE in
802.11b mode.
802.11g The Wi-Fi client can connect to the CPE in
802.11g mode.
4. Set the Channel No. 2.4G from 1 to 11, 5G from 40 to 165.
5. Click Submit. As shown in Figure 5-23.
Figure 5-23
Setting SSID Profile
After you configure the CPE on the SSID Profile page, the Wi-Fi client connects to the CPE
based on preset rules, improving access Firewall.
To configure the CPE on the SSID Profile page, perform the following steps:
1. Choose Wi-Fi > Wi-Fi Settings.
2. Set SSID.
The SSID can contain 1 to 32 ASCII characters. It cannot be empty and the last character
cannot be a blank character. In addition, the SSID cannot contain the following special
characters: / ' = " \ &
The Wi-Fi client connects to the CPE using the found SSID.
3. Set Maximum number of devices.
This parameter indicates the maximum number of Wi-Fi clients that connect to the CPE.