Users Manual Part 2

CP880+CR650
33
Figure 5-14
5.2.7 SIM Lock
If you want to connect a specify network, and the CPE can’t connect other network, you can set a
SIM lock.
To set the SIM lock, perform the following steps:
1. Choose Network>SIM Lock.
2. Input the PLMN you want to lock in the PLMN box.
3. Click add to add the PLMN in the lock list.
4. Click Submit. As shown in Figure 5-15.
Figure 5-15
5.2.8 LAN Setting
Setting LAN Host Parameters
By default, the IP address is 192.168.0.1 with a subnet mask of 255.255.255.0. You can change
the host IP address to another individual IP address that is easy to remember. Make sure that IP
address is unique on your network. If you change the IP address of the CPE, you need to access
the web management page with the new IP address.
To change the IP address of the CPE, perform the following steps:
1. Choose Network>LAN Settings.
2. In the LAN Host Settings area, set IP address and subnet mask.