Users Manual Part 2

CP880+CR650
29
Figure 5-9
Setting Frequency (Earfcn)
To set the frequency, perform the following steps:
1 Choose Network>Scan Mode.
2 In the Scan Mode area, choose EARFCN Lock.
3 In the EARFCN Lock area, you can set an EARFCN, then click Add to add it to the
EARFCN lock list.
4 Click Submit. As shown in Figure 5-10.
Figure 5-10
Setting PCI LOCK
To set the pci lock perform the following steps:
1. Choose Network>Scan Mode.
2. In the Scan Mode area, choose PCI Lock.