Users Manual Part 1

CP880+CR650

Step 3:

3.1: Insert B at the back end of C

3.2: keep B close to C

3.3: then tighten A

1, Care must be taken to prevent damage to the entry threads when organizing and

installing cable glands

2, Don’t install cable glands while the circuits are live.

3, Cable gland parts aren’t well-matched with those of any other manufacturer of cable

gland.

4, Take note that a cable gland isn’t a user-serviceable item.

5, Cable gland sealing rings are added in the cable gland if dispatched from the factory.

3.2 Attach the Stainless-steel clamp to the Enclosure

Using a screwdriver to loosen the metal hose clamps，through the terminal equipment mounting

hole, the metal hose clamps and the pole is fixed;