User's Manual

IPv6 WAN Settings
In this page, user can enable or disable IPv6 function. Meanwhile, user can set WAN Connection
Type and the type of DNS.As shown in Figure 5-27
Figure 5-57
IPv6 LAN Settings
In this page, user can chose the AutoConfiguration Type. As shown in Figure 5-58.
Figure 5-58
5.8 System
5.8.1 Maintenance
Reboot
This function enables you to restart the CPE. Settings take effect only after the CPE restarts. To
restart the CPE, perform the following steps:
1. Choose System>Maintenance.
2. Click Reboot. As shown in Figure 5-59.