User's Manual

Figure 5-24
DoS
On this page, you can enable or disable the Denial of service (DoS) function.
1 Choose Firewall > DoS.
2 Set UPnP to Enable.
3 Click Submit. As shown in Figure 5-55.
Figure 5-255
5.6 VPN
This function enables you to connect the virtual private network (VPN).
To connect the VPN, perform the following steps:
Choose VPN.
In the VPN Settings area, enable VPN.
Select a protocol from Protocol drop-down list.
Enter Username and Password.
Click Submit.
You can view the status in VPN Status area. As shown in Figure 5-55.