User's Manual

Figure 5-15
URL Filtering
Data is filtered by uniform resource locator (URL). This page enables you to configure URL
filtering rules.
Enabling URL Filtering
To enable URL Filtering, perform the following steps:
3. Choose Firewall>URL Filtering.
4. Set URL Filtering to Enable.
5. Click Submit. As shown in Figure 5-45.
Figure 5-16
Disabling URL Filtering
To disable URL Filtering, perform the following steps:
1. Choose Firewall>URL Filtering.
2. Set URL Filtering to Disable.
3. Click Submit. As shown in Figure 5-46.
Figure 5-17
Adding URL Filtering list
To add a URL filtering list, perform the following steps:
Choose Firewall>URL Filtering.
Click Add list.
Set URL.
Click Submit. As shown in Figure 5-47.