User's Manual

2. Set Allow access network within the rules.
3. Click Submit. As shown in Figure 5-33.
Figure 5-43
Setting Deny access network within the rules
To set deny access network within the rules, perform the following steps:
1. Choose Firewall>MAC Filtering.
2. Set Deny access network within the rules.
3. Click Submit. As shown in Figure 5-34.
Figure 5-35
Adding MAC Filtering rule
To add a MAC filtering rule, perform the following steps:
Choose Firewall>MAC Filtering.
Click Add list.
Set MAC address.
Click Submit. As shown in Figure 5-35.