Quick Start Guide

Configure The CPE
Login to the Website
Use a browser to access the management web page to configure
and manage the CPE.
The following procedure describes how to use a computer running
Windows 7 or above version and Internet Explorer to connect to the
CPE webpage.
Step 1
Connect the CPE correctly.
Step 2
Start Internet Explorer, go to http://192.168.1.1 in the
address bar, and press Enter.
Step 3
Enter the user name (admin) and password (user2008), and
click Log In.
You can connect to the management web page after the password
is verified.
Configuration of LTE
Step 1 Connect the CPE correctly.
Step 2 Enter the management website.
Step 3 Choose Settings → Network → LTE Settings.
Step 4 Set the connection mode and scan mode.
The default setting is automatically connection and full band
scanning,if you want to connect the LTE network according to your
needs,you can set the connection mode as manual,and simply scan
a specified band.
Configuration of Wi-Fi
Step 1
Connect the CPE correctly.
Step 2
Enter the management website.
Step 3 Choose Settings → Wi-Fi → WLAN Settings.
Step 4 In the General Settings, set Wi-Fi Enable or enable Wi-Fi with the
Wi-Fi button.
Step 5
In the Setting, change the SSID, such as "LTE-Router"
Step 6 To ensure data security, it is recommended that you change
the Wi-Fi password by default.
Step 7 Click Submit to save the settings.
Troubleshooting
The POWER indicator does not turn on.
Make sure that the power cable is connected properly and the CPE is
powered on.
Make sure that the power adapter is compatible with the CPE.
Fails to login the web management page.
Make sure that the CPE is started.
Verify that the CPE is correctly connected to the computer through Wi-
Fi or a network cable.
The CPE fails to search for the wireless network.
Check that the power adapter is connected properly.
Check that the CPE is placed in an open area that is far away from
obstructions, such as concrete or wooden walls.
Check that the CPE is placed far away from household electrical
appliances that generate strong electromagnetic field, such as micro-
wave ovens, refrigerators, and satellite dishes.
The power adapter of the CPE is overheated.
The CPE will be overheated after being used for a long time. There-
fore, power off the CPE when you are not using it.
Check that the CPE is properly ventilated and shielded from direct
sunlight.
The parameters are restored to default values.
If the CPE is powered off unexpectedly while being configured, the
parameters may be restored to the default settings.
After configuring the parameters, download the configuration file to
quickly restore the CPE to the desired settings.
If the problem persists,please contact authorized local service suppliers.
This product has reached the standard of shipment inspection.
Notice
Some features of the product and its accessories described herein rely
on the software installed, capacities and settings of local network, and
may not be activated or may be limited by local network operators or
network service providers, thus the descriptions herein may not exactly
match the product or its accessories you purchase.
We reserves the right to change or modify any information or specifica-
tions contained in this manual without prior notice or obligation.
Please take attention that changes or modification not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
8
7
6
5