Quick Start Guide

LTE Indoor CPE
CP860
Quick Start Guide
Introduction
The CP860 is a premium indoor LTE CPE, designed for 802.11a/b/
g/n/ac dual band Wi-Fi access. The product provides optimized high
throughput data and a wide area coverage network for residential,
commercial and enterprise users, supporting multiple services.
Customers enjoy reliable dual-band Wi-Fi AP functions, broadband
access and hot-spot Wi-Fi connections with the CP860.
LTE BTS
Indoor
CPE
Panel of Device
I/O Panel of Router
LED Panel of Router
Packing List
Make sure you have everything you need to properly configure the
device.
Configure Hardware
Insert SIM Card
If you want to remove the SIM card, please lightly press the SIM
card, the SIM card will pop out. Make sure the CPE is turned off
before you insert or remove your SIM card. Otherwise, the CPE
and SIM card may be damaged.
Please insert your SIM card (3FF) as following:
How does it Work
The figure is just for reference only, please connect according
to your requirements.
Step 1 Connect the supplied power adapter to the CPE.
Step 2 Connect other devices.
You can connect your computer or classic Switch via
Ethernet cable to LAN port.
You can connect your laptop via Wi-Fi.
When you are using the CPE, you can adjust the position and
direction of CPE to get stronger LTE signal, you can judge from
the LTE signal LED indicators.
LED Indicators
When set up the CP860, you will see the following LED indicators:
Power
Adapter
Wi-Fi 11 a/b/g/n/ac
4
2
1
3
Indicator
Status
Description
POWER
Steady on
Power On
Off
No Power Supply
INTERNET
Steady on
Internet Available
Off
Internet Unavailable
Blinking
(500ms interval)
Searching network of LTE
5G WiFi
Steady on
5G WiFi Available
Off
5G WiFi unavailable
2.4G WiFi
Steady on
2.4G WiFi Available
Off
2.4G WiFi unavailable
SIGNAL
Steady on
Display the current LTE network signal,
the stronger signal,the more bars on
Off
No Signal
Blinking one by one
Firmware upgrade
IDU
Power supply
Ethernet cable