Installation Instructions

SOAP / LOTION DISPENSER INSTALLATION INSTRUCTIONS
ITEM SL5060 - TRADITIONAL
ITEM SL5065 - CONTEMPORARY
SPECIFICATIONS
• MAX COUNTER THICKNESS 2-3/8”
• INSTALL HOLE SIZE 1-3/8“
• LARGE CAPACITY CLEAR BOTTLE
• SOLID BRASS CONSTRUCTION
* TOOLS NEEDED
Adjustable Wrench
Remove top (A)
from dispenser
body (B).
Remove spacer
(C) and nut (D)
from threaded
shroud.
AA
B
C
D
E
Select desired position and drill
1-3/8” hole in counter or sink.
Fit dispenser body through hole.
1-3/8” hole
Slide spacer (C) to underside of
sink or counter. Thread nut (D)
and tighten securely.
Thread bottle (E) into bottom of
dispenser shroud. Add soap
or lotion from top of dispenser
into bottle.
G
F
Slide clear tubing
(F) into tube fitting
(G) at bottom of
spout.
Insert open end of
clear tubing down
through dispenser
and into bottle.
Insert top. Pump
spout a few times
to begin flow of
soap or lotion.
STEP ONE STEP TWO STEP THREE STEP FOUR
STEP FIVE STEP SIX STEP SEVEN
www.btiaquasolutions.com
7022 South Revere Parkway • Suite 240 • Centennial, CO 80112 • 720.322.0800 (o) 720.322.0801 (f)
REV. 3/5/18
C
D