Installation Instructions

BTI AQUA-SOLUTIONS DIGITAL INSTANT HOT WATER DISPENSER GUIDE TO OPERATION
To power ON/OFF or to select VACATION MODE, simply press and hold center button for 3 seconds.
When the Dispenser is in heating mode, there will be a sequence of red/blue rings illuminating individually to indicate the
Dispenser is actively heating.
Once the desired temperature is reached, the dial’s red/blue rings will become static.
When the Instant Hot Water Dispenser is empty and is powered ON, the unit will automatically sense the situation. The
heating element will not engage and the “lack of water” will be indicated on the display panel by ashing a 208º
temperature reading.
When “lack of water” indicator is displayed, the dry-burn protection sensor has automatically activated.
When “lack of water” indicator is ashing 208º, press the ON/OFF center button and hold for 3 seconds to power down the
unit. Then, ll the Dispenser and follow the starting procedures. When water is drawn from the Dispenser through the Hot
& Cold or Hot Only Filtration Faucet, OR the temperature inside the Dispenser falls by 6º F, the Dispenser will automatically
reheat the water to the desired setting.
GETTING TO KNOW YOUR INSTANT HOT WATER DISPENSER
•
•
•
•
•
•
TEMPERATURE ADJUSTMENT (for temperatures above 203º F)
The BTI Aqua-Solutions Digital Instant Hot Water Dispenser has been set for optimum performance in most common and known
situations. However, there are factors which may inuence the performance of the Dispenser, such as incoming water
temperature, atmospheric pressure, and altitude.
Should you experience any discharge of water from the Filtration Faucet spout during heat-up, you can reduce the temperature
setting to compensate by adjusting the unit in 3 degree increments until the water discharge is eliminated.
Consult the “High Altitude Cooking” information included.
REMEMBER TO ONLY PLUG THE DISPENSER IN AFTER THE
UNIT IS COMPLETELY FILLED WITH WATER
ITEM HT4105
POWERS ON/OFF, SELECTS VACATION MODE
RAISE TO NEXT PRESET TEMPERATURE
LOWER TO NEXT PRESET TEMPERATURE
RAISE TEMPERATURE IN 3º INCREMENTS
LOWER TEMPERATURE IN 3º INCREMENTS
6