Installation Instructions

⑫ Repeater Shift Direc
+ means shift Positive direction,-means shift Negative direction
⑬Field strength table.
When receiving, display the receiving field strength indicator.
⑭Electronic compass.
Display the electronic compass.
⑮Speed
The current movement speed of the device
⑯ altitude
The altitude of the current location of the device
⑰ID Name
The device name of this device, you can customize the ID name in the menu (Signaling setting)
⑱Status bar.
After receiving the GPS or connecting the mobile phone, the actual time and date of satellite time
service or network time service will be displayed.
Transmitting status indicator
The arrow up∧ means transmitting, and the arrow down∨ means receiving.
Electronic compass
① Sensor prompt icon.
The "=" icon in the middle of the electronic compass means that it is disturbed by the external environment.
You need to enter the menu [Compass] and perform correct ion operations according to the on-screen
instructions. At this time, after entering the menu [Compass], the screen will prompt "Please place the
device on a level surface (screen facing up), and then press the [0K] button in the upper left corner of the
keyboard.
② Sensor prompt icon.
The "8" icon in the middle of the electronic compass indicates that it is disturbed by the external
environment. You need to enter the menu [Compass] and perform correction operations according to the
screen prompts.
At this time, after entering the menu [Compass], the screen will prompt "Please calibrate the sensor
according to the figure 8 rotating device".
At this time, please hold the device and stretch it forward, and draw the figure eight (ie " ") quickly and
forcefully. It is better to complete one to eight characters in about 2 seconds.
If it is sometimes close to a strong magnet, the screen will prompt an icon, and the icon will be restored
immediately after it is far away, and no correction is required at this time. If the electronic compass is found
to be unresponsive during use, please enter the menu [Compass] to calibrate the sensor to avoid being
misled by the strong external magnetism.
Tips: Try to keep the device away from strong magnets, which will affect the device sensors.