Installation Instructions

④Down key.
Page down.
⑤ Back/Change screen key.
In the menu mode, it is the return key.
In the standby screen mode, it is the switch screen key. Press this key repeatedly to switch back
and forth between the three screen modes.
⑥ Exit key.
Exit the current setting.
Icon function
① Radio.
Represents the normal standby state of the radio.
②GPS satellite.
On behalf of the GPS function. GPS is turned on by default when powering on.
③Power icon.
H stands for high power and L stands for low power.
④Scan.
It means the scanning function is on.
⑤ Talk Around
It means the talk around function is on.
⑥ Connect headset
The device is connected to wireless headset.
⑦Connect to mobile phone.
The device is connected to the mobile phone.
⑧ Battery power.
Battery level display. (The specific battery percentage can be queried by entering [Status] in the menu)
⑨ Channel Name:
The current channel Name
⑩ Channel No.:
The current channel No. for the frequency.
⑪ Main band
After dual standby is turned on, the frequency of the main band will be red and with red arrow.