Operating Manual
33
2.2CH DIS Channel display mode setting- MENU 15
The channel display mode of the walkie-talkie has a display mode of channel name, working frequency,
and channel number, the set-up steps are as follows:
1. Press the [MENU] key to enter the main menu, press the cd key to enter the MENU 15, LCD should
display as:
2. Press the [MENU] key again to enter the CH DIS menu.
3. Press the cd key to select FREQ/CH NUM/NAME.
Note: Note: FREQ - displays channel working frequency; CH NUM - displays
channel number; NAME - displays channel alias.
After turning off the voice prompt function, there will be a beep prompt when you select a channel or
menu setting.
4. Press the [MENU] key to confirm your selections.
5. Press the [W
WX
] key to cancel your selections.
6. Press the [PTT]
key to exit the menu mode.