Operating Manual

25
3. Press the cd key to select the squelch level, and set the selection range to either 0 or 1-9
4. Press the [MENU] key to confirm your selections.
5. Press the [W
WX
] key to cancel your selections.
6. Press the [PTT]
key to exit the menu mode.
Backlight Intensity (DISPLAY LIGHT) - MENU 04
The LCD backlight is convenient for you to use at night or in a dark environment. The LCD backlight setting
steps are as follows:
1. Press the [MENU] key to enter the main menu, and press the cd key to enter the MENU 04.
2. Press the [MENU] key again to enter the LIGHT menu.
3. Press the cd key to select the LCD backlight switch, and the selection range to ON/OFF/KEY
Note: ON-backlight will be always on; OFF-backlight will be always off; KEY-touch key will automatically
activate the backlight. Without any key operation, the backlight will be automatically turned off after
a delay of 5 seconds.
4. Press the [MENU] key to confirm your selections.
5. Press the [
WX
] key to cancel your selections.
6. Press the [PTT]
key to exit the menu mode.