User Manual

VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
47
For more information see the section called “11 R-CTCS - Receiver CTCSS” and the section called “13 T-CTCS -
Transmitter CTCSS” in Appendix B, Menu definitions.
DCS$
DCS is set with menus 10 R-DCS and 12 T-DCS.
For a complete list of available DCS codes, see Table C.1, “DCS Codes” in Appendix C,
Technical specifications.
Procedure 8.2. DCS setup how-to
1. Press the [MENU] key to enter the menu.
2. Enter 10 on the numeric keypad to get to receiver DCS (R-DCS).
3. Press [MENU] to select.
4. Scroll to the desired DCS code on the numeric keypad, or rotate the main knob to the desired
frequency.
5. Press [MENU] to confirm and save.
6. Enter 12 on the numeric keypad to go to transmitter DCS (T-DCS).
7. Press [MENU] to select.
8. Scroll to the desired DCS code on the numeric keypad or rotate the main knob to the desired
frequency. Make sure it's the same code as that you entered for receiver DCS.
9. Press [MENU] to confirm and save.
10. Press [EXIT/AB] to exit the menu system.
To turn DCS off, follow the same procedure but set it to off with the “0” key instead of selecting a DCS code.