User's Manual Part 2

section 06
page
43
40040005 rev. 000
Screen.
Step 7. Click the Super Protocol you wish to use.
A testing screen will appear with the tests for the super protocol already added to your client.
If other tests have already been added to the client, the super protocol tests will be listed be-
low them (Figure 6-94).
Edit a super protocol by clicking Edit in the main Super Protocol screen and selecting the su-
per protocol you wish to modify. You can then add and remove tests by highlighting a test and
clicking Add or Remove.
To
delete any protocol, first click the Delete icon in the main Super Protocol screen; the De-
lete icon should change to Cancel Delete. Next click on the super protocol you wish to delete.
VII. VALIDITY ANALYSIS
The Validity Analysis allows you to evaluate the patient’s actual results versus the expected
results. This may be done for any or all of the tests completed by the patient.
Access the Validity Analysis by clicking on the Validity Analysis icon located on the Home
Screen. (Figure 6-95)
This will bring you to the main Validity Analysis screen (Figure 6-96).
Figure 6-94. Super Protocol Added to Client
Figure 6-95. Validity Analysis Icon