User's Manual Part 1

page
6
section 06
40040005 rev. 000
Since editing and creating protocols are very similar, an example of an edited test will be
given, but the same guidelines apply for creating a test.
The following can typically be edited or created on Cardiovascular Tests:
A. Test Name - Type in the name of the test
B. Set Maximum Allowable Heart Rate - Select whether to set the maximum allowable
heart rate and at what percentage of age.
C. View Initial Heart Rate - Select whether to view the initial heart rate within the test
screen
D. View Peak Heart Rate - Select whether to view the peak heart rate within the test
screen
E. View Final Heart Rate - Select whether to view the final heart rate within the test
screen
F. View Percent Heart Rate Increase from Initial - Select whether to view the percent
heart rate increase from the initial within the test screen
G. View Recovery Heart Rate - Select whether to view the recovery heart rate within the
test screen and choose when to stop the recovery time
H. Use a Rating - Select whether to use a rating and then set the rating
I. Examiner Description - Type in any description the examiner will need to perform the
test - this field is especially useful for supplying instructions on how to perform the evalu-
ation
J. Report Description - Type in any description that should be included on the report
K. Reference Information - Include any reference information that needs to be added to
the report
L. Test Duration Options - Choose which method will determine test duration
M. Use a Metronome - Select whether to use a metronome and number of beats per minute
Figure 6-4. Custom Cardiovascular Protocol
A
B
D
F
H
I
J
K
C
E
G
L
M
N