User's Manual

249
Either double click on the test name or highlight it and click on Perform Test to go in to the test screen.
The following screen will appear if the client’s heart rate and blood pressure have not been measured and
entered into Cardiovascular Intake. This must be done before you can continue with testing.
If this has been done the following screen will appear.
The first thing to do is to click on Weight Verification. You will be asked to take the shelf or any
attachments off the FOCUS Load Cell and click OK. You will then be prompted to attach the shelf to the
load cell and click OK. Make sure the shelf is in completely, the pin in place and tightened. Next you will
be prompted to place 20 pounds on the shelf and then click OK twice. If more than one dynamic lifting or
carrying protocol is being used for a particular client on the same day, this only needs to be done once.
For the next dynamic test selected. Click on Weight Verification and click on the bottom OK to proceed
with testing.
Once this has been completed you will be brought back to the testing screen and the Weight Verification
button changes to the Start button. Make sure the client is wearing the heart rate monitor prior to starting
the test. If you are measuring the heart rate manually, double click on the heart. Enter in the value and hit
the enter key.