User's Manual

233
mechanism. The lip on the top of the shelf should be at the back to prevent the lifting crate from being
pushed off the back of the shelf.
Twist the handle on the Multiplanar Accessory Housing Joint again until a clicking sound is heard.
The shelf should be gripped with both hands and shaken gently to ensure that it is firmly secured within
the accessory housing mechanism.
Removing the Accessory ER shelf
Locate the top handle on the right-hand side of the Multiplanar Accessory Housing Joint. Loosen the
handle with a half turn in the counterclockwise direction. Pull the handle and twist a ¼ turn to release the
pin from the shelf.
The shelf should be gripped and gently rocked it back and forth until it slides out of the accessory housing
mechanism.