User's Manual

167
Performing a Range of Motion Test with the Goniometer
From the ODES main menu, you must first select or create a client. You will then be able to click ROM
Test to enter the Range of Motion Protocols page.
Highlight the test that you wish to perform (in this case, right ankle range of motion has been selected).
In order to add the protocol to your client, click Add to Client. You will now see you’re the selected test
appear in the ‘Test Assigned to Client’ box. To perform this test you may either double-click on the
protocol name, or highlight it and click Perform Test.
The testing page for the selected protocol will be displayed. In order to begin a test, make sure that the
correct tool is listed in the upper left-hand corner of the testing page (underneath the protocol name). In
order to perform the test make sure that your cursor is flashing in the space beside Trial #1.