User's Manual

163
Once you have chosen a test, the following testing page appears:
If the device that you wish to use is not connected properly, or if the DAC box is not communicating with
your computer, you will not be able to perform the test. If this is the case, a red ‘X’ will appear beside the
name of the tool you wish to utilize and the picture of the tool will appear as a keyboard. If this happens,
please see the trouble shooting section of this manual.
If the wrong tool appears in the upper left-hand corner of the screen (for example, the dual inclinometers
instead of the goniometer), double click on the name of the tool. This allows you to alternate between the
two range of motion tools.
Shows the
test name
and device
being
utilized
Shows Test
Number
Lists
protocol
instructons
Device
being
used to
record
readings
Test results are
recorded in these
fields