Datasheet

STM32F103xx Electrical characteristics
41/84
On-chip peripheral current consumption
The current consumption of the on-chip peripherals is given in Tabl e 18 . The MCU is placed
under the following conditions:
● all I/O pins are in input mode with a static value at V
DD
or V
SS
(no load)
● all peripherals are disabled unless otherwise mentioned
● the given value is calculated by measuring the current consumption
– with all peripherals clocked off
– with only one peripheral clocked on
● ambient operating temperature and V
DD
supply voltage conditions summarized in
Ta bl e 4
Table 17. Typical current consumption in Standby mode
Symbol Parameter Conditions
V
DD
Typ
(1)
1. Typical values are measures at T
A
= 25 °C, V
DD
= 3.3 V.
Unit
I
DD
Supply current in
Standby mode
(2)
2. To obtain Standby consumption with RTC ON, add I
DD
_V
BAT
(Low-speed oscillator, RTC ON) to I
DD
Standby.
Low-speed internal RC oscillator and
independent watchdog OFF
3.3 V 2
µA
2.4 V 1.5
Low-speed internal RC oscillator and
independent watchdog ON
3.3 V 3.4
2.4 V 2.6
Low-speed internal RC oscillator ON,
independent watchdog OFF
3.3 V 3.2
2.4 V 2.4
I
DD_VBAT
Backup domain
supply current
Low-speed oscillator and RTC ON
3.3 V 1.4
µA
2.4 V 1.1