User`s guide

ID Setting
This wireless keyboard kits contains 2 channels, and each channel contains
256 sets ID. This extra ID-recognition function helps to protect against
interference from other RF keyboards in the same environment.
# The word CONNECT labels the ID button on each unit.
# The LED under ID button of receiver shows connecting condition.
Step 1: Press the ID button on the top of the receiver once.
ID Button
Step 2: Press the ID button on the bottom of the mouse once.
CHANNEL
SWITCH
ID BUTTON
Step 3: Press the ID button on the bottom of the keyboard once.
CH2
CH1
ID Button
Remarks:
1.
You must follow the procedure above to set the IDs of receiver, mouse and
keyboard.
Once the receiver ID button is pressed you have 30 seconds to
complete the entire process, or you will need to begin again.
ID Button of Receiver
ID Button of Mouse
ID Button of Keyboard