User guide

22 Common questions
Using ADSL filters
Q
I already have ADSL filters. Do I need to change them over?
You can leave your existing filters in place or replace them with the new ones sent with
your Hub. It’s up to you.
Q
What do I do if I don’t have enough ADSL filters?
You can get ADSL filters from www.shop.bt.com/microfilters or most high street
computer shops.
If you don’t have enough filters, but want to set up broadband, you should unplug any
device without an ADSL filter from its phone socket. You can reconnect the device once
you’ve an ADSL filter for it.
Q
Can I connect more than one phone to an ADSL filter?
Yes. If you use a phone socket doubler, you can connect more than one phone to a
single ADSL filter, as shown here.
Q
I have an ADSL master socket. Do I still need to use ADSL filters?
No. When you get to Getting Started guide step 4,
you’ll simply plug your broadband cable straight
into the ADSL master socket’s DSL socket.
A broadband (ADSL) master socket looks like this:
ADSL v1.0