User guide

10 About your Hub
Hub Manager
Your BT Home Hub 3 is like a computer. It has its own software running, which controls how
it works and what it does. You can change your Hub’s settings using your Hub Manager –
simply open your web browser and type bthomehub.home in the address bar.
Access to your Hub Manager is secured using a password. When accessing the Hub
Manager for the first time, you’ll be asked to enter the Admin password – see your
Hub’s handy pull-out. You will then be asked to enter a new password of your choice.
There’s some space on page 43, if you’d like to write it down.
You can also enter a password hint that can help you remember your password when
you need it.
If you can’t remember your Admin password, you can use the Password Override feature.
When you’re in Hub Manager, press the Password Override button. Then press and hold
the WPS button for about 20 seconds and you’ll then need to enter the wireless key (see
your Hub’s pull-out) as the username, and the serial number (see under Hub) as the
password. You’ll then need to enter a new password as if you were accessing the Hub
Manager for the first time.
About your Hub
88888888
8888WWWW
8888dddddd
BTHub3-WWWW
88888888
8888WWWW
8888dddddd
BTHub3-WWWW
Example only