User guide

Quick reference guide8

If your computer is showing the message ‘Windows cannot conﬁgure this wireless

connection’, see the User Guide on your CD or www.bt.com/business/help/ﬁbre

6 Open your web browser – you should be on the internet. If you can’t connect to the internet,

make sure that the ‘Automatically detect settings’ box is checked in Internet Options/

Connections/LAN settings. Then restart your computer and try these steps again.

For more about wireless, including adapters, see the User Guide on your CD

or www.bt.com/business/help/ﬁbre

Connect computer using the Ethernet cable without the CD

1 Check that your computer has a spare Ethernet port. This is a small socket on the back or

side of your computer and is usually marked ‘LAN’ or ‘Ethernet’. If you aren’t sure, check the

documents supplied with your computer.

2 Plug one end of the yellow Ethernet cable into one of your Hub’s Ethernet sockets.

3 Plug the other end of the Ethernet cable into your computer’s Ethernet socket.

4 Open your web browser – you should be on the internet. If you can’t connect to the internet,

restart your computer and try these steps again.

> If you still can’t connect or if a dial-up window appears, check your computer’s IP settings

– see the User Guide on your CD or www.bt.com/business/help/ﬁbre