User's Manual

BTPAINTBALL.COM
1
1. Rules for Safe Marker Handling
IMPORTANT: Never carry your TM-15 uncased when not on a playing
field. The non-playing public and law enforcement personnel may not be
able to distinguish between a paintball marker and firearm. For your own
safety and to protect the image of the sport, always carry your TM-15 in
a suitable marker case or in the box it came in.
• Treat every marker as if it were loaded.
• Never look down the barrel of a paintball marker.
• Keep your finger OFF the trigger until ready to shoot.
• Never point the marker at anything you don’t wish to shoot.
• Keep the marker on “safe” until ready to shoot.
• Keep the barrel blocking device in/on the marker’s barrel when not shooting.
• Always remove paintballs and air source before disassembly.
• After removing air source, point marker in safe direction and discharge
until marker is degassed.
• Store the marker unloaded and degassed in a secure place.
• Follow warnings listed on the air source for handling and storage.
• Do not shoot at fragile objects such as windows.
• Every person within range must wear eye, face, and ear protection designed
specifically to stop paintballs and meeting ASTM standard F1776.
• Always measure your marker’s velocity before playing paintball and
never shoot at velocities in excess of 91.44 meters (300 feet-per-second).
READ OWNERS MANUAL BEFORE USING.
2. Introduction and Specifications
Congratulations on your selection of the TM-15 paintball marker. The TM-
15 is made to provide you with many years of reliable performance. We are
honored that you have chosen the TM-15 as your marker of choice and
hope you enjoy using this high quality product.
The patented Valve design, Slip Stream™ Solenoid, Hall Effect Sensor
Trigger, and Four Position Selector Switch set new standards for marker tech-
nology. The TM-15 is precision engineered from magnesium alloy, aircraft-
grade aluminum, and composite materials. We expect you to play hard and
play frequently and the TM-15 was built with this in mind.
The TM-15 operates on low pressure. The main operating pressure is
180–200 PSI. The pressure can be nominally adjusted and monitored visually
via the gauge on the bottomline regulator. There is no secondary regulator
to worry about
.
TTMM--1155 SSppeecciiffiiccaattiioonnss
Model- TM-15
Barrel- 14" Ported Barrel
Caliber- .68
Action- Semi Auto, PSP Burst, and NXL Full Auto
Air source- Compressed Air
Battery- One 9-Volt (Alkaline Only)
Cycle Rate- Up to 20 BPS
Shell Material- Magnesium Alloy
Accuracy Range- 150ft +
IInncclluuddeedd wwiitthh yyoouurr TTMM--1155
- 14" Barrel (.691 bore)
- Allen Wrenches
- Spare Parts Kit
- Barrel Blocking Device
- One 9-Volt Battery
- Manual
- One BT Rip-Clip
™
Adapter & Adapter Screw Kit, for use with the TM Rip-
Clip
™
only. (TM Rip-Clip
™
not included)
3. Battery Replacement and Life Indicator
The TM-15 requires a single 9-volt alkaline battery as the electronic power
source. The use of long life batteries is recommended. The battery is installed
by removing the magazine and inserting a 9-Volt battery into the magazine.
BT_TM-15_Manual.qxp 6/17/09 5:23 PM Page 1