Specifications

Record Terminal Server Applications
type of recording agent you are using: the AR agent with recording enabled, or
the BT Recording agent.
Define EventLogSetting for the BT Recording Agent
Use the following procedure when you want the BT Recording agent to record
activity for terminal server applications that originate only from specified users
or systems, or to otherwise limit the data recorded in the event log.
Caution: Be careful when using regedit to change registry settings. If you are
not familiar with regedit, contact Technical Support for assistance.
To define EventLogSetting for the BT Recording agent
1. On the system where the BT Recording agent resides, start regedit and
navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Firstsense\Firstsense.
2. Edit the value of EventLogSetting. To monitor a terminal server
application, replace the existing value with session: followed by a comma-
separated list of user names or system names, indicating the users or
systems for which you want to record application activity. For example, to
indicate that you want to monitor application activity for users green,
brown, and yellow, specify the following value:
session:green,brown,yellow
3. Click OK.
If the agent is currently running, it may take one or two minutes for this
setting to take effect.
Define EventLogSetting for the AR Agent
Use the following procedure to specify a filter for the AR agent before starting
event recording for a terminal server application, or to otherwise limit the data
recorded in the event log.
To define EventLogSetting for the AR agent
1. Access the Agent Properties page of the eHealth Web interface.
2. Click Configure Agent.
3. In the Standard Settings list, locate EventLogSetting.
4. Edit the value of EventLogSetting.
To monitor a terminal server application, replace the existing value with
session: followed by a comma-separated list of user names or system
names, indicating the users or systems for which you want to record
application activity.
Set Up the Recording Agent 45