Specifications

Requirements for the BT Recording Agent
To enable recording for the AR agent
1. Access the Agent Properties page:
a. Log in to the eHealth Web interface using the admin user account.
b. On the Systems & Apps page, click Application Response in the left
frame.
c. Click Agents.
d. In the agent list, click the agent name.
2. If you will be recording events for a terminal server application (such as
one managed using Citrix), define EventLogSetting to filter the application
activity that is recorded.
3. On the Agent Properties page, click Start Event Recording.
4. The AR agent immediately begins to collect information about all
application activity performed on the client system and stores it in the
event log file. By default, this file is named events.btl and it is located in
the same directory as the AR agent.
Note: To reduce the size of the event log file and to avoid collecting undesired
information, enable recording for only short periods while the application is
used to perform the transactions to monitor. Stop recording as soon as you
have collected the desired data.
Requirements for the BT Recording Agent
Before installing the BT Recording agent, make sure that the target system
meets the following requirements. The BT Recording agent does not require a
software license.
Note: Do not run the BT Recording agent on the eHealth system.
Component Requirements
CPU Pentium II 400 MHz or higher (recommended)
on an Intel-based, PC-compatible system
42 BTStudio Administration Guide