User guide

4. Place the handset in the charger and charge the handset
for at least 16 hours. The red Charging light on the
charger comes on.
Once the batteries are partly charged, the icon will
flash in the handset display and the icon will appear.
Once the handset registers with the base, the icon
stops flashing.
Your BT Studio 500 Twin is ready for use.
9Getting started
BT Studio 500 additional handset
Your BT Studio 500 handsets
are the same, so instructions
throughout this guide apply
to both.
Handset numbers
Once registered with the base,
each handset will display its
handset number, and
respectively.
BT Studio 500/Studio 500 Twin – 3rd Edition – 14th August ’03 – 5464
5464 BT Studio 500/Twin UG [2] 14/8/03 3:32 PM Page 9