User guide

BT Studio 500/Studio 500 Twin – 3rd Edition – 14th August ’03 – 5464
Getting started6
WARNING
Do not place your BT Studio 500 in
the bathroom or other humid areas.
Handset range
The handset reception range from
the base is up to 300m outdoors
and up to 50m indoors, in ideal
conditions.
Signal strength
The icon on your handset
indicates when you are in range.
When it flashes, you are out of
range.
IMPORTANT
The base station must be plugged
into the mains power socket at all
times.
Do not connect the telephone line
until the handset is fully charged.
Which socket?
Power socket
Telephone line socket
A
If you have purchased the BT Studio 500 Twin please
follow instructions
A
and
B
.
Location
You need to place your BT Studio 500 close enough to
a mains power and telephone socket so that the cables
will reach.
The strength of the handset signal depends on where you
site the base. Putting it as high as possible can help to
provide the best signal. Make sure it is at least 1 metre
away from other electrical appliances to avoid interference.
Setting up the base
1. Plug the power adaptor and telephone cables into the
back of the base.
Power adaptor cableTelephone line cable
5464 BT Studio 500/Twin UG [2] 14/8/03 3:32 PM Page 6