User guide

36
BT Studio 500/Studio 500 Twin – 3rd Edition – 14th August ’03 – 5464
Help
No ring on the handset. Check that the base station is plugged into the phone
socket and that the mains power is switched on.
The ringer volume may be set too low for you.
See page xx to adjust the volume.
Buzzing noise on my Sometimes your BT Studio 500 can interfere with other
radio, TV, computer or electrical equipment if it is placed too close.
hearing aid.
It is recommended that you place your BT Studio 500 at
least one metre away from such appliances to avoid any
risk of interference.
The handset charger is The power adaptor is properly plugged into the charger.
not working.
Your handset has slotted correctly into the charger.
The batteries are fitted correctly into the handset.
The base is plugged into a working socket and the
socket is switched on.
Are you using the correct power adaptor?
Caller’s number is not The number has been withheld by the caller, is
displayed even though unavailable or is an international call, see page 18.
you have subscribed to
a Caller Display service.
5464 BT Studio 500/Twin UG [2] 14/8/03 3:32 PM Page 36