User guide

Switchboard compatibility
This product is intended for use within the UK for
connection to public telephone network and compatible
switchboards, which support tone dialling and timed
break recall. If in doubt please consult your network
service provider.
Switchboard external line access code
You may need to enter an access code (e.g. 9) in order to
get an outside line. So that the switchboard has time to
pick up an outside line, you may also need to add a
Pause after the access code.
A Pause lasts 3 seconds. You can Pause dialling at any
time by pressing the button.
To insert an access code followed by a pause
1. Begin storing a number (see ‘Quickdial’ on page 17).
2. Enter the access code and where a pause is needed,
press . You can then continue storing the remaining
part of the phone number.
Pause
You may also need to insert a
pause when storing international
dialling codes, charge card
numbers and with other tele-
banking facilities.
BT Studio 500/Studio 500 Twin – 3rd Edition – 14th August ’03 – 5464
Switchboard use 33
5464 BT Studio 500/Twin UG [2] 14/8/03 3:32 PM Page 33