User guide

BT Studio 500/Studio 500 Twin – 3rd Edition – 14th August ’03 – 5464
Call screening
When the answering machine is switched on, you can
use the loudspeaker to listen to callers leaving their
messages.
1. Press to interrupt and speak to the caller.
Any message they have already recorded will be kept.
Power failure
If the mains power is lost, your answering machine will
keep many personalised settings when it is switched on.
The settings after a power failure will be:
Outgoing message
. . . . . . . . . As last set by you
Answer Delay
. . . . . . . . . . . . . . As last set by you
On/Off
. . . . . . . . . . . . . . . . . . . . . As last set by you
Message indicator
. . . . . . . . . Flashing, if any messages
have been recorded
Messages
. . . . . . . . . . . . . . . . . . Saved
Volume
. . . . . . . . . . . . . . . . . . . . Level 5
PIN
. . . . . . . . . . . . . . . . . . . . . . . . 000
Day/time
. . . . . . . . . . . . . . . . . . . 12:01 PM Saturday
28 Using the answering machine
Loudspeaker volume
Use the buttons.
5464 BT Studio 500/Twin UG [2] 14/8/03 3:32 PM Page 28