User guide

The answering machine is pre-set
to Answer and Record mode.
Outgoing messages
The outgoing message (OGM) is the greeting a caller
hears when the answering machine picks up their call.
Your BT Studio 500 gives you a choice of two pre-recorded
outgoing messages, one for Answer and Record and one
for Answer Only.
Answer and Record
Callers hear the announcement and are able to leave a
message for you.
The pre-recorded message is “Hello, your call cannot be
taken at the moment, so please leave your message after
the tone.”
Answer only
Callers hear an announcement but cannot leave a message.
The pre-recorded message is “Hello, your call cannot be
taken at the moment, and you cannot leave a message, so
please call later.”
Select and play outgoing message
1. Press and hold until you hear “Please select outgoing
message.”
24 Using the answering machine
BT Studio 500/Studio 500 Twin – 3rd Edition – 14th August ’03 – 5464
Personalise your OGM
To record your own outgoing
message, see ‘Record your own
outgoing message’, see page 25.
5464 BT Studio 500/Twin UG [2] 14/8/03 3:32 PM Page 24