Instruction Manual

ManualsBrandsBT ManualsAnswer phoneStudio 3500

BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999

BT Studio 3500

User Guide

8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 1

Summary of content (56 pages)

PAGE 1
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 1 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.
PAGE 2
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 2 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 Section Welcome… to your BT Studio 3500 Digital Cordless Telephone Answering Machine • 50 Name and number phonebook for storing your most frequently used numbers. • Digital answering machine for high quality message recording. • Caller Display shows you who’s calling before you answer the phone* and keeps a list of your last 40 callers. You can also dial numbers direct from the Calls list.
PAGE 3
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 3 BT Studio 3500 – Issue 2 – Edition 2 – 25.10.07 – 8474 Section This User Guide provides you with all the information you need to get the most from your phone. Before you make your first call you will need to set up your phone. Follow the simple instructions in ‘Getting Started’, over the next few pages. • Need help? If you have any problems setting up or using your BT Studio 3500 please contact the Helpline on 0870 605 8047 or email bt.
PAGE 4
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 4 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 4 In this guide Getting started Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Setting up the base and handset . . . . . . . . 6 Set the answering machine day and time . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Check the current day and time setting . . . 10 Getting to know your phone Handset buttons. . . . . . . . . . . . . . . . . . . . . .
PAGE 5
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 5 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 In this guide Answer delay . . . . . . . . . . . . . . . . . . . . . . . . 34 Record a memo . . . . . . . . . . . . . . . . . . . . . . 35 Call screening . . . . . . . . . . . . . . . . . . . . . . . . 35 Memory full . . . . . . . . . . . . . . . . . . . . . . . . . 36 Remote access . . . . . . . . . . . . . . . . . . . . . . . 36 Operating your answering machine from another phone. . . . . . . .
PAGE 6
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 6 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 6 Getting started WARNING Do not place your BT Studio 3500 in the bathroom or other humid areas. Handset range The BT Studio 3500 has a range of up to 300 metres outdoors when there is a clear line of sight between the base and handset. Any obstruction between the base and handset will reduce the range significantly.
PAGE 7
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 7 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 Getting started 2. Plug the power adaptor into the mains wall socket and switch the power on. When connected correctly, the green Power light on the base comes on. 3. Insert the 2 x AAA rechargeable batteries supplied, taking note of the polarity markings inside the battery compartment, then slide the battery compartment shut. WARNING Never use non-rechargeable batteries.
PAGE 8
474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 8 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 8 Getting started Battery performance To keep the batteries in the best condition, leave the handset off the base for a few hours at a time. Running the batteries right down at least once a week will help them last as long as possible. After charging your handset for the first time, subsequent charging time for the batteries is approximately 6–8 hours.
PAGE 9
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 9 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 Getting started Set the answering machine day and time using the handset Your answering machine will automatically add the day and time each message is received. Set the day: 1. Press , scroll to TAM SETTINGS and press 2. Scroll to DAY SETTING and press is displayed. 3. Press or to confirm. . . The current day The default day and time setting is Saturday 12.01 pm.
PAGE 10
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 10 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 10 Getting started Check the current day and time setting 1. Press Stop . The current day and time setting is announced. Your BT Studio 3500 is now ready for use. If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.
PAGE 11
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 11 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 Getting to know your phone 11 Handset buttons Secrecy / Clear / Back During a call, press to switch secrecy on/off. When on, your voice will be muted so your caller cannot hear you, page 16. In menu mode, press to return to the previous menu or press and hold to exit and return to standby.
PAGE 12
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 12 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 12 Getting to know your phone Standby screen Battery charge level Range indicator Answering machine Current time Handset number Handset display icons Flashes to indicate an incoming external call Flashes to indicate new calls list entries received* External call in progress Flashes to indicate new answer machine message(s) received.
PAGE 13
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 13 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 Getting to know your phone 13 Using the menu All your phone’s functions and settings can be accessed through the main menu. The menu map below shows all menu options you can choose from. Quick exit a menu If you want to exit a menu or cancel an operation at any time you can press and hold to return to the standby screen. Press to enter the menu. The icon is displayed.
PAGE 14
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 14 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 14 Getting to know your phone Answering machine base and charger See page 27 for more detailed information about your answering machine. OGM Press to hear your outgoing message. Find (page) Press to page handsets registered to the base. Can be useful to find misplaced handsets, page 18. Press and hold to enter the outgoing message mode. Stop Stops message playback.
PAGE 15
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 15 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 Using your phone 15 Switch the handset power on/off 1. To switch off, press and hold until the display goes off. 2. To switch the handset on, press and hold . Make a call 1. Press . When you hear the dial tone, dial the phone number. Preparatory dialling 1. Enter the phone number first. The number is shown in the display. 2. Press to dial the number.
PAGE 16
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 16 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 16 Using your phone Secrecy You can stop your caller from hearing you while you talk to someone else close by. 1. During a call, press . The handset microphone is muted and the display shows MUTE . 2. Press again to resume your call. Adjusting the earpiece volume 1. During a call, press the volume. to increase or to decrease Redial The last 10 numbers dialled are stored in the redial list.
PAGE 17
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 17 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 Using your phone Delete a number from the redial list 1. Press then scroll or to the entry you want. 2. Press . DELETE ? is displayed, press to cancel. to confirm or Delete the entire redial list 1. Press to open the redial list, then press and hold Display shows DELETE ALL ? . 2. Press to confirm or . to cancel.
PAGE 18
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 18 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 18 Using your phone Keypad lock You can lock the handset keypad to prevent accidental dialling while carrying it around. You do not need to unlock the keypad to answer a call, just press or lift the handset as normal. 1. To lock the keypad press and hold shows the icon. until the display 2. To unlock the keypad press any button, the display shows PRESS * . 3. Press within 3 seconds.
PAGE 19
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 19 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 Using your phone Using the phonebook You can store up to 50 name and number entries on each BT Studio 3500 handset registered to your base. Each name can be up to 12 characters long and each number up to 24 digits long. You open the phonebook with the button. Add an entry to the phonebook For each entry you store, you can select one of 5 different ringtones.
PAGE 20
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 20 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 20 Using your phone 5. The display shows MELODY 1 , press ringtone you want. or to select the 6. Press to confirm. ADD ENTRY is displayed. You can now enter your next name and number or press twice to return to standby. Display the name or number When name is displayed, you can switch between the name and number by pressing . Dial from the phonebook 1. Press to open the phonebook. The 2.
PAGE 21
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 21 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 Using your phone 5. Press to delete the number if required, then enter the new number and press . 6. If required, select a new melody then press to confirm. 7. ADD ENTRY is displayed. You can now enter your next name and number or press twice to return to standby. Delete an entry 1. Press then scroll to PHONE BOOK and press 2. Scroll to DELETE ENTRY and press . . 3.
PAGE 22
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 22 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 22 Using your phone • make an internal call between two handsets while a third is on an external call You can have up to 5 handsets registered to your BT Studio 3500 base. Make an internal call The handset number is displayed on standby screen of each handset, eg. HS 1. 1. Press The then enter the handset number (1–5) you want. icon is displayed to indicate an internal call.
PAGE 23
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 23 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 Using your phone 3. When the other handset answers press to transfer the call. If the other handset does not answer, press to speak to your external caller again. 3-Way call You can hold a three-way conversation between an external caller and another handset user. 1. During an external call, press . Your caller is put on hold. 2. Enter the handset number you want to invite. 3.
PAGE 24
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 24 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 24 Caller Display & the Calls list Caller Display For more information on Caller Display and BT’s other Calling Features, call BT on Freefone 0800 800 150. Caller Display shows who is calling and if the caller’s number matches an entry stored in the phonebook, the number will alternate with the name. During a call, the caller’s details are replaced by the call timer after 15 seconds.
PAGE 25
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 25 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 Caller Display & the Calls list View the Calls list 1. Press to open the Calls list. If there are no calls in the list, the display shows EMPTY . 2. Press or to scroll through the list. When the icon is displayed, this call was answered; when the icon is displayed, the call was unaswered. When you reach the end of the list, the handset will beep.
PAGE 26
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 26 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 26 Caller Display & the Calls list Copy a number to the phonebook 1. Press then scroll you want. through the list to the entry repeatedly until the displays shows ADD? . Press 2. Press If you need help entering a name, see page 19. or again. 3. The display shows NAME?. Use the keypad to enter the name, then press . 4. The number is displayed, edit the number if necessary, then press . 5.
PAGE 27
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 27 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 Using the answering machine Your BT Studio 3500 can digitally record up to 13 minutes of messages. As well as recording incoming messages, you can record memos for other users. You can operate your answering machine from: • the base • the handset • or remotely, from any other Touchtone telephone, see page 36.
PAGE 28
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 28 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 28 Using the answering machine Listening to your messages Using the base: 1. Press . The number of new messages is announced, then the new message(s) will be played. OR Press and hold and the number of all (new and old) messages is announced. The oldest message is played first. During playback: Press , to pause a message. You will hear a beep every 10 seconds.
PAGE 29
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 29 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 Using the answering machine Press Stop to return to the current answering machine mode On or Off. At the end of playback: You will hear ‘End of messages. To delete all messages, press delete’. You then have 8 seconds in which you can: a. Press to delete all messages, you will hear ‘All messages deleted’. b. Press Stop to cancel message deletion.
PAGE 30
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 30 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 30 Using the answering machine During playback: Press or to adjust the playback volume. Press or once to repeat the current message. Press or twice to play the previous message. Press or to play the next message. Press to delete the current message. You will hear, ‘Message deleted’. At the end of playback: You will hear, “End of messages. To delete all messages, press delete”.
PAGE 31
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 31 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 Using the answering machine Record your own OGM This will replace the pre-recorded or your own previous outgoing message. However, you can re-instate the pre-recorded OGM at any time by deleting your own recorded OGM. Using the base: 1. Press and hold until prompted to select which type of OGM you want to record. 2. Press and keep holding to select Answer & Record or to select Answer Only.
PAGE 32
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 32 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 32 Using the answering machine 5. Place the handset to your ear. You will hear, “Please speak after the tone. To end recording, press #”. 6. After the long beep speak your message slowly and clearly into the handset, to end recording press . Your message will then be played back to you through the handset. Check your current OGM Using the base: 1. Press on the base.
PAGE 33
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 33 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 Using the answering machine Select the OGM Using the base: 1. Press and hold your type of OGM. on the base until prompted to select 2. Press to select Answer & Record or to select Answer Only. The message you select is played. Using the handset: to TAM SETTINGS and press . 1. Press , scroll 2. Scroll to ANS MODE and press 3.
PAGE 34
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 34 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 34 Using the answering machine 2. Scroll to OGM SETTING and press 3. Scroll to DELETE OGM and press . . 4. Press or to select either ANS AND REC or ANS ONLY and press . Your personal OGM has been deleted and the prerecorded OGM will be played.
PAGE 35
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 35 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 Using the answering machine Record a memo You can record memo messages for other users which can be played back just like normal messages. Memo’s can only be recorded using the handset. Using the handset: 1. Press , scroll to TAM SETTINGS and press . . Place the handset to 2. Scroll to MEMO REC and press your ear and you will hear, “Please speak your messages after the tone.
PAGE 36
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 36 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 36 Using the answering machine Your BT Studio 3500 can store up to a maximum of 13 minutes recording or 59 messages. Memory full If there is less than 35 seconds recording time left in the memory, the caller will hear, “Please complete your call within 35 seconds”, after the outgoing message and before recording tone.
PAGE 37
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 37 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 Using the answering machine 2. Enter your 3-digit PIN (default setting 000) within 8 seconds. You will hear, ‘You have ‘n’ new messages’ and they will be played back. 3. If you have no new messages, you will hear, “You have no new messages, to hear main menu press 1”. If you do not press 1 within 8 seconds, the machine hangs up.
PAGE 38
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 38 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 38 Using the answering machine Set the security PIN code Using the handset: 1. Press , scroll to TAM SETTINGS and press 2. Scroll to REMOTE CODE and press display the current code. 3. Enter a new code and then press . . The handset will to confirm. Check security code 1. Press at the base. The security code is announced.
PAGE 39
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 39 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 Handset settings 39 Handset ringer volume You can adjust the ring volume and set different levels for internal and external calls. Choose from 5 levels and Off. to HANDSET and press . 1. Press , scroll 2. Scroll to INT RING VOL or EXT RING VOL and press 3. Press or 4. Press to confirm or to While the phone is ringing you can adjust the ringer volume by pressing or . .
PAGE 40
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 40 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 40 Handset settings Handset name If you make a mistake press to delete an incorrect character or digit. See ‘Entering names’ on page 19 for help on entering names. You can give your handset a name according to use, eg. Kitchen or Michael. The name appears in the display. to HANDSET and press 1. Press , scroll 2. Scroll to NAME and press . . 3.
PAGE 41
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 41 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 Handset settings Battery low warning beep on/off 1. Press , scroll to HANDSET and press 2. BEEP is displayed, press . . 3. Scroll to LOW BATTERY and press 4. Press or . to select ON or OFF and press to confirm. Out of range warning beep on/off 1. Press , scroll to HANDSET and press 2. BEEP is displayed, press . . 3. Scroll to OUT RANGE and press 4. Press or .
PAGE 42
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 42 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 42 Handset settings Auto answer Your phone is set to answer calls by lifting the handset off the base or charger. You can switch this feature off so that calls always have to be answered by pressing . to HANDSET and press 1. Press , scroll 2. Scroll to AUTO ANSWER and press 3. Press or . . to select ON or OFF and press to confirm. Set the date 1.
PAGE 43
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 43 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 Handset settings Set the alarm 1. Press , scroll to DATE-TIME and press 2. Scroll to ALARM SET and press 3. Press or . . to select ON or OFF and press To silence the alarm When the alarm sounds, press any button to turn it off. . 4. If you selected ON , use the keypad to enter the time you want the alarm to sound, e.g. 07--30 for 7.30 am.
PAGE 44
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 44 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 44 Base settings Base ringer volume You can choose from 5 volume levels and Off. 1. Press , scroll to SETUP and press 2. Display shows BASE VOLUME , press 3. Press or 4. Press to confirm or to . . to select the volume (1 – 5 or OFF). return to the previous menu. Base ringer melody Choose from 5 different base ringer melodies. to SETUP and press 1. Press , scroll 2.
PAGE 45
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 45 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 Base settings Change base PIN code Some functions are protected by a 4 digit PIN code which must be entered if you want to change the settings. The default PIN is 0000. to SETUP and press 1. Press , scroll 2. Scroll to P IN CODE and press IMPORTANT If you change the base PIN, make sure you keep a record of the new number on page 55. . . 3.
PAGE 46
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 46 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 46 Base settings WARNING Resetting your phone to its default settings will delete any entries in the Phonebook, Redial and Calls list and will reset the clock and alarm settings. Default settings Low battery beeps . . . . . . . . . .ON Out of range warning beeps . . OFF Key beep . . . . . . . . . . . . . . . . . .ON Auto answer . . . . . . . . . . . . . . .ON Internal melody . . . . . . . . . .
PAGE 47
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 47 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 Additional handsets and bases Up to 5 handsets can be registered and operated from the BT Studio 3500 base. Each handset can be registered with up to four bases. If you buy new handsets to use with your BT Studio 3500 they will have to be registered to the base before you can use them.
PAGE 48
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 48 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 48 Additional handsets and bases Naming additional handsets Once you have registered additional handsets you may wish to give them a different name, see page 40. If the base is not found after a few seconds, the handset returns to standby. Try registering again.
PAGE 49
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 49 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 Additional handsets and bases If you select AUTO , your handset will automatically search for and connect with the base with the strongest signal. 1. Press , scroll to REGISTER and press 2. SELECT BASE is displayed, press . . 3. All bases that your handset is registered to will be displayed, e.g. BASE 1 2 3 4. The currently selected base number flashes. 4.
PAGE 50
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 50 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 50 Help Most problems are caused by the telephone and mains power cables being incorrectly connected, not connected at all, or by the power being turned off. If you are experiencing a problem with your BT Studio 3500, check the following: • That the mains power supply is correctly connected at both the base and at any chargers, and that the power is switched on at the wall socket.
PAGE 51
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 51 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 Help Base or handset does not ring • Check that the ringer volume has not been set too low or Off, see page 39 and 44. Keypad does not seem to work • Check that the keypad lock is not on, see page 18. • Try removing the batteries and putting them back again. Incoming caller’s number is not displayed even though you have Caller Display • Caller has to allow their number to be sent.
PAGE 52
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 52 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 52 General information IMPORTANT This equipment is not designed for making emergency telephone call when the power fails. Alternative arrangements should be made for access to emergency services. This product is intended for connection to analogue public switched telephone networks and private switchboards in the United Kingdom. • Never dispose of batteries in a fire.
PAGE 53
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 53 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 General information Product disposal instructions Connecting to a switchboard The symbol shown here and on the product means that the product is classed as Electrical or Electronic Equipment and should not be disposed with other household or commercial waste at the end of its working life.
PAGE 54
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 54 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 54 General information Guarantee Within the 12 month guarantee period Your BT Studio 3500 is guaranteed for a period of 12 months from the date of purchase. If you experience difficulty using the product, prior to returning your product, please read the Help section beginning on page 50, or contact the BT Studio 3500 Helpline for assistance on 0870 605 8047 or email bt.helpdesk@suncorptech.
PAGE 55
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 55 BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999 General information A total REN of 4 is allowed per telephone line. (For example, if the BT Studio 3500 is used in conjunction with three extension telephones, each with a REN of 1, then the total = 4.) R&TTE For your records Date of purchase: Place of purchase: This product is intended for use within the UK for connection to the public telephone network and compatible switchboards.
PAGE 56
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 56 BT Studio 3500 – Issue 2 – Edition 2 – 25.10.07 – 8474 Offices worldwide The services described in this publication are subject to availability and may be modified from time to time. Services and equipment are provided subject to British Telecommunications plc’s respective standard conditions of contract. Nothing in this publication forms any part of any contract. © British Telecommunications plc 2007.