Installation guide

13
INSTALLATION
4. The setup information is displayed, click Continue.
The driver is then entered in the Windows Registry database and will be
activated as soon as your PC is re-started. When requested if you wish to
re-start Windows click Ye s.
5. After re-starting a new program group ‘Speedway PCI’ will have been added
to your Windows Start Menu and a program group of the same name will
be seen on the Desktop.
You will find a ‘Readme’ and two applications in the Speedway PCI program
group.
You are now ready to install the Speedway! applications.
3.4 Installing the Speedway! Applications & the
CAPI Port Driver
Note
You can quit the installation procedure at any time by clicking the Cancel
button.
1. If you have removed the CD from the machine after the previous
installation section, re-insert the CD into your PC. The CD should
automatically load and you should see the ‘BT Speedway ISDN PCI
Welcome’ screen (Figure 4). If the CD does not automatically load use
Windows Explorer (or Start - Run menu) to open the intro.hlp file on
the CD.
2. Click on the BT icon to bring up the ‘Windows System Selection’ screen.
3. On this screen, click on the Windows operating system version you are
using. This will display the ‘Installation Selection’ view.
4. Click on the Speedway! Applications Suite icon.
5. On the next window, click on the Start Installation icon.
The installation program will now start and the ‘BT Speedway’ screen is
displayed. It is best to follow the on-screen instructions that are now
displayed, but you may find it easier to refer to the instructions below:
6. Click Next. Here you can specify the directory in which the applications
will be installed with the Browse button. The default is
C:\PROGRAM\FILES\SPEEDWAY!\.
7. Click Next. In the next window displayed, choose a program folder group
for your applications. The default is Speedway! Then click Next.