Installation guide

9
INSTALLATION
Note
Sometimes Windows may have difficulty finding and loading files on the CD.
This is due to how Windows was originally installed. You must use the Browse
function in order to select the correct file path, including the correct drive letter
for the CDROM.
9. After the files are copied across, the ‘BT Speedway ISDN PCI Card’ screen
will be shown (Figure 2).
10. Now follow the instructions in Part E.
C For Windows 98
1. Switch on your PC, if you have not already done so, and Windows will
automatically detect the card you have just installed.
2. Immediately after the ‘New Hardware Found’ screen is displayed the ‘Add
New Hardware’ wizard will be started and it’s initial display shown.
3. Insert the BT Speedway PCI Card CD in your PC’s CD drive.
4. Click Next and in the new window select Search for the best driver for your
device
and click Next.
5. In the next window, click on box marked Specify a Location. Either type
D:\CARDWARE\WINDOWS.98 (where D should be substituted with the drive
letter that represents your CD drive) and click Next
OOrr
click Browse and in
the ‘Drives’ section select your CDROM drive letter. Double-click on
Cardware which will be shown in the ‘Folders’ section and double-click on
Windows.98. Click OK and click Next on the following screen.
Figure 2