Operation Manual

Response 123 Plus ~ Edition 3 ~ 5.1.01 ~ 3305
To insert a pause when
storing a number
Press the REDIAL button at
the point where you want to
enter a pause. When you dial
the number stored in the
memory, your Response 123
Plus will automatically insert
the pause where it was stored.
10
Using the telephone
Redial
Using the memory to
store and dial numbers
Your Response 123 Plus can store and
dial up to 10 phone numbers, each up
to 16 digits long, which can be dialled
by pressing just 2 buttons.
Enter the number you want to
store.
Press the
STORE button again.
Press keypad number (any
number from 0-9) under which
you want to store the phone
number.
Replace the handset.
Store
To store a number
Press buttons in the order shown
Lift the handset. The dialling
tone can be heard. When
storing numbers you will still
hear the dial tone and may
hear recorded messages from
the telephone exchange.
Please ignore this, it does not
affect storing numbers.
Press the
STORE button.
Store
Note
Use the directory label to make a note
of the numbers you have stored in the
memory.
Note
When storing numbers in the
memory you will not hear
confirmation beeps as you press the
keypad buttons.