Unit installation

78
Option 9 – Log
The Galaxy 16 and 16 plus provide a 250 event Log stored in the Non-Volatile
Memory (NVM) chip. The Event Log can be viewed using the keypad or by
using the Print menu option.
This option can only be accessed by the Engineer Code (Usr 15) and the Manager
Code (Usr 14).
Viewing the Event Log from a Keypad
Once the Log option has been selected, the current date is displayed. Press the A
key to move from the first event back through the log (event 001, 250, 249...), or
the B key to move from the first event forward through the log (event 001, 002,
...250). Continued pressing of these keys allows each of the events stored in the
log to be viewed.
Figure 5.14 Event Log Entries.
Each time a new day is accessed the date and the next event number are displayed,
pressing the A or B key will move the display to the next log entry. To display the
date of the event currently displayed press the # key. Press the # key again to
return to the event details. To quickly search the log for a specific event number
enter a three digit number — between 001 and 250 and press the A or B key. If the
number corresponds to an event it is displayed. If no corresponding event number
is found the system returns to the previously displayed event number.
Printing the Event Log
A print out of the Event Log can be obtained by connecting a serial printer, via a
Printer Interface module or an RS232 module, to the AB line (line 1), refer to
Section 2: Optional Modules; RS232 Interface Module and Printer Interface Mod-
ule
.
Event
activation/deactivation
signaller
09:57 STAR KEY+
T T
T T
T ENABLE 092
Event time
Event type
Event number
Event descriptor
9 = Log