Unit installation

77
15 Batt Low
The Batt Low output type is activated in the event of a stand-by battery power
failure. It is restored to the de-active state when the stand-by battery power
returns.
16 Tamper
The Tamper output type is activated in the event of a module tamper alarm or a Bell
Tamper alarm. For information on module tamper alarms see Section 2: OPTIONAL
MODULES
.
17 Zone Omit
The Omit output type is activated anytime a zone is omitted form the system,
either manually or force omitted at rearm.
8 = Outputs (cont’d)