Unit installation

76
8 Security
The Security output type is instantly activated by the opening of Security zones
in a set or unset state. The output latches on until a valid code is entered. The
Security output is not subject to Re-arm or Bell Delay.
9 Confirm
The Confirm output type is used to give confirmation of an Intruder type alarm.
The Confirm output is only triggered by the following zone types: Exit/Entry,
Intruder, Dual and Security. After the first activation of one of these zone types
the Intruder outputs will activate; following this another activation of one of
these zone types (on a different zone) will cause the Confirm output to activate.
10 Horn
The Horn output type is activated by any event that activates the keypad horn,
that is: keypad zone chimes, see OPTION 2: CHIME; Medical alarms, see Section
3: GALAXY KEYPADS; Keypad Operation; Star Key; activation of any of the
following zone types Intruder, Fire, PA, Dual, Security, also Final and Exit/Entry
zone types (activating Exit Time and Entry Time countdowns respectively).
11 Medical
The Medical output type is activated by holding down the Star (Ö) and 5 keys on
the keypad to cause a Medical alarm. Once the Medical output has been activated
the word MEDICAL appears on the keypad display until one of the buttons on the
keypad is pressed to acknowledge the alarm. A valid User Code or the Engineer
Code must be entered to cancel the alarm. For more information on the star key
functions see Section 3: GALAXY KEYPADS; Keypad Operation; Star Key.
The Medical output is also activated by the activation of a Link A zone type that
has been assigned the Medical (M) SIA mnemonic.
12 AC Fail
The AC Fail output type is activated in the event of a mains power failure. It is
restored to the de-active state when the a.c. mains supply returns.
13 Link A
The Link A output type is activated when a zone of type Link A is open. For more
information see Option 7 – Zones; 13 Link A and Table 5.12 Link A and B
Functional Programming Options.
14 Link B
The Link B output type is activated when a zone of type Link B is open. For more
information see Option 7 – Zones; 14 Link B and Table 5.12 Link A and B
Functional Programming Options.
8 = Outputs (cont’d)