Unit installation

74
Table 5.15 Output Functions (and Activating Zones).
Output Types
1 Fire
The Fire output type is instantly activated by Fire zones in the set and unset state.
The output latches on until a valid code is entered. The Fire output is not subject
to Re-arm or Bell Delay.
2 PA
The PA output type is activated by PA and PA Silent zones and the Ö2 (PA
Silent) code in the set and unset state. It also activated by entry of the User 13
code if the User 13 Duress parameter is enabled, see Section 5: MENU OPTIONS;
Option 6 – Parameters; 06 User Options; 14 Usr 13 Duress. The output remains
latched until reset with a code authorised for PA Reset, refer to Section 5: MENU
OPTIONS; Option 4 – Codes and Option 6 – Parameters; 07 Reset. The PA
output is not subject to Re-arm or Bell Delay.
3 Intruder
The Intruder output type is activated in an intruder alarm condition when the
system is Full Set. An intruder alarm condition occurs if any of the following zone
types are activated when the system is full set: Exit/Entry, Intruder, PA or Secu-
rity zones. The intruder output activates in the Part Set state if the Part Intruder
parameter is enabled, see Section 5: MENU OPTIONS; 6 – Parameters; 06 User
Options; 04 Part Intruder
.
P/OcnuFP/O
epyTenoZyBdetavitcA
laniFtnE/xE.rtnIeriFAPliSAPlauD.ceSAkLBkL
1eriF
ü†
2AP
ü† ü†
3redurtnI
üü ü† üü
4teS
5slleB
üüü† ü† üü
6ebortS
üüü† ü† üü
7cdhctiwS
8ytiruceS
ü†
9mrifnoC
üü üü
01nroH
üüüü† ü† üü†
11lacideM ‡
21liafCA
31AkniL
ü
41BkniL
ü
51woLttaB
61repmaT
71timO
† .etatstesnUdnateSnidetavitcatuptuO
‡ ybdetavitcaylnotuptuO Ö (ratS3.3elbaTees,syek5 Ö .snoitanibmoCyeK)
8 = Outputs (cont’d)