Unit installation

60
Table 5.8 User Options.
Note: Option 1, Quick Set is selected by entering 01 when using direct access.
Options 2–9 are selected by entering either a single or double digit number
(2 or 02), options 10–13 by entering a double digit number (10, 11, 12,
13).
When the required user options have been assigned, press the ent key to save
the selection.
01 Quick Set
When enabled this option allows the user to Full Set the system with one push
of the A key (no code required).
Note: Only works from the Day Banner or Engineer Banner.
02 Quick Part
When enabled this option allows the user to Part Set the system with one push
of the B key (no code required).
Note: Only works from the Day banner or Engineer banner.
03 Part Bells
When enabled this parameter will activate Bell and Strobe outputs if an alarm
condition occurs when the system is Part Set.
6 = Parameters (cont’d)
noitpOtluafeD
teSkciuQ10delbasiD
traPkciuQ20delbasiD
slleBtraP30delbanE
redutnItraP40delbasiD
yaleDAP50delbasiD
0yeKtnatsnI60delbasiD
emittrobA70delbasiD
teStraP80delbasiD
hgiHliaFeniL90
‡
delbasiD
lluFgoLgiS90
†
delbasiD
rgMteseR01delbasiD
tneliStraP11delbasiD
yaleDliaFCA21delbasiD
larotseRenoZ31delbasiD
sseruD31rsU41delbasiD
teSnehWmeR51delbasiD
‡ .ylno61yxalaG † 61yxalaG sulp
.ylno