Unit installation

45
Section 5: MENU OPTIONS
General
The Galaxy 16 and 16 plus provide various menu options for modifying the
functional performance of the system.
The Galaxy 16 and 16 plus allow multi-user access. All the keypads (a maximum
of three) can be used to simultaneously carry out operations on the system.
Only valid codes can access the Galaxy menu options. Options 5 to 11 can only
be accessed by the engineer with the following exceptions:
• Menu Option 5 – Test; the Manager Code can perform a test on the Bells
and Strobe outputs.
• Menu Option 9 – Log; can be accessed by the Manager Code.
• Menu Option 10 – Time; can be accessed by the Manager Code.
Table 5.1 Menu Options and User Accessibility.
Engineer Mode
To program the Galaxy 16 and 16 plus the system must be in Engineer Mode.
This allows access to all Engineer menu options. To access Engineer Mode,
enter the four digit Engineer Code twice. On entry of the last digit a tamper
alarm activates. The second entry of the code cancels this alarm and puts the
system into Engineer Mode, see Figure 5.1 Entering Engineer Mode.
Menu Options
noitpOuneM
.oN
reenignE
sseccA
reganaM
sseccA
resU
sseccA
1timOseYseYseY
2emihCseYseYseY
3klaWseYseYseY
4sedoCseYseYelbammargorP
5tseTseYseYoN
6sretemaraPseYoNoN
7senoZseYoNoN
8stuptuOseYoNoN
9goLseYseYoN
01emiTseYseYoN
11txeTseYoNoN
211snoitacinummoCseYoNoN
312snoitacinummoCseYoNoN