Unit installation

Interrupted Setting (Full or Part)

If the exit time countdown is interrupted by a zone opening then: the zone

number, type and descriptor will be displayed; the Horn outputs will activate;

and the keypad buzzers will beep rapidly until the zone is closed.

If the exit time countdown is interrupted by more than one zone opening then

the keypad will display the number of zones open and prompt the user to view

the zone number, type and descriptor using the A and B keys; the Horn

outputs activate and the keypad buzzers beep rapidly until all zones are closed.

Closing all zones will cause the setting routine to restart.

See Figure 4.5 Interrupted Setting Messages.

02 OPEN

[<],[>] TO VI EW

(b)

Two zones open during

exit time countdown.

04 I NTRUDER

BAKERY

(a)

Zone 04 open during exit

time countdown.

Zone No. Zone Type.

Zone Descriptor.

Figure 4.4 Part Setting Routine for Group 3 Only.

Figure 4.5 Interrupted Setting Messages.

Setting with Omitted Zones

The system may be set with zones omitted (bypassed), this means that those

zones are not monitored during the set period and will not cause the system to

go into alarm. For more information on omitting zones and setting with zones

omitted see Section 5: Menu Options; Option 1 Omit.

Interrupted Setting

(c)

System Set confirmation

(a)

Part set exit

time countdown

(b)

Countdown terminated

(d)

Screen goes blank

PART 3 060

❚❚❚❚❚❚❚❚

000000000000000000

000000000

PART 3

0000000000000000000000000000000000

00000000000000000

SYSTEM IS SET