Unit installation

ÖÖ

Ö 6: Entering a User Code or the Engineer Code and pressing Star/6 initiates

a print out of the System details. Pressing esc aborts the printing. A

serial printer must be connected to the system via an RS232 module or

printer interface module, see Section 1: SYSTEM ARCHITECTURE.

The print out includes: System (software version, system time and date),

Chime (zone programming) and Codes (User Code attribute programming

(this does not include the actual code)).

To skip any of the three sections (System, Chime and Codes) press the

# key, to abort the printing press the esc key.

Note: A hash (#) or pound symbol (£) may appear next to some of the

entries in the print out, eg £, 09=CHIME or #, 09=CHIME. A

# or £ symbol indicates that these entries have that option disabled.

An entry without the # or £ symbol, eg Chime next to a zone,

indicates that the option is enabled.

ÖÖ

Ö 7: Entering a User Code or the Engineer Code and pressing Star/7 initiates

a print out of the Event Log. Pressing esc aborts the printing. A serial

printer must be connected to the system via an RS232 module or printer

interface module, see Section 1: SYSTEM ARCHITECTURE.

The print out is a replica of the Event Log as viewed via a Galaxy

keypad. For details on reading the Event Log see Section 5: MENU

OPTIONS; Option 9 – Event Log.

ÖÖ

Ö 8: Activates a Fire alarm, see Sec. 5: MENU OPTIONS; Option 8 Outputs.

ÖÖ

Ö 9: Entering a User Code or the Engineer Code (Usr 15) and pressing Star/

9 initiates the Engineer’s Test (Channel/Code 9) which sends a test

signal to the Alarm Receiving Centre.

Note: This option is available on the Galaxy 16 plus only.

ÖÖ

Ö ent: Entering the Manager Code (Usr 14) and pressing Star/ent activates the

Manager Authorise Call Back option for Galaxy Gold. For more

information on Call Back see Section 5: MENU OPTIONS; Option 12 –

Comms 1; 10 Access; 2 Manager Authorise

Note: This option is available on the Galaxy 16 plus only.

ÖÖ

Ö esc: Entering the Manager Code (Usr 14) or the Engineer Code (Usr 15) and

pressing Star/esc toggles the Star features on/off.

Keypad Operation (cont’d)